Straight Shooter Plumbing & Rooter installs and services water softeners for hard water and filtration systems for taste, odor, and sediment in Farragut homes, after evaluating which one the water calls for.
If you moved into a Farragut home from somewhere with soft water, the white crust on the showerhead and the film on the glasses may be new to you. Or the water tastes different from what you are used to and you are not sure whether that is a softener problem, a filter problem, or no problem at all. Straight Shooter Plumbing & Rooter installs and services both softeners and filtration systems, and the first job is telling you which one, if either, your water calls for. Call (865) 761-8765 for a free estimate during normal business hours.
What does a water softener do, and what does it not do?
A softener removes hardness. Hardness is dissolved calcium and magnesium, and it is what leaves scale on fixtures, film on glassware, residue in the water heater, and that feeling that soap will not rinse. A traditional softener exchanges those minerals out of the water as it enters the house, so they stop depositing on everything downstream.
A softener does not remove sediment, does not change a chlorine taste, and does not address odors. If those are your complaints, a softener is the wrong purchase.
What does filtration do, and what does it not do?
Filtration removes things other than hardness. Depending on the filter type, that can be sediment and grit, chlorine taste and odor, or other specific concerns identified in an evaluation. Filtration can be installed for the whole house at the point where water enters, or at a single tap for drinking and cooking water.
A standard filter does not soften water. If your complaint is scale and spotting, a filter will not fix it.
Because the two do different jobs, some homes need one, some the other, and some both, installed in sequence. The company's water softener and filtration systems page covers the equipment types.
If you recognize your Farragut home here, call (865) 283-5643 or book online for an evaluation and a free estimate during normal business hours.
Whole-house or single-tap: where should treatment go?
Point of entry (whole house). Equipment at the main line treats every tap, the water heater, and every appliance. This is where a softener goes, since scale affects the whole plumbing system, and where whole-house filtration goes when the concern is sediment or a taste you want gone everywhere.
Point of use (one tap). A filter under the kitchen sink or at a dedicated faucet treats only the water you drink and cook with. This fits when the concern is taste at the kitchen tap and the rest of the house does not need it.
Many homes end up with a softener at the point of entry and a filter at the kitchen tap. The evaluation shows which combination makes sense and avoids paying for treatment where it is not needed.
What does the evaluation cover?
- Your water, assessed against the concern you raise: hardness, taste, odor, sediment, staining. If the real question is "what is in my water," start with water treatment and testing in Farragut, which is the evaluation service.
- Your household: people, water use, and peak demand, which set the capacity of a softener or filter.
- Your plumbing: where water enters, space for equipment, drain access for a softener, and line condition.
- Your priorities: protecting the water heater and fixtures, better-tasting drinking water, a whole-house fix, or a combination.
From that comes a recommendation with equipment, placement, maintenance expectations, and price. Estimates are free during normal business hours.
What goes wrong when equipment is bought on a guess?
A softener bought for a taste problem leaves the taste. A filter bought for scale leaves the scale. A softener sized by guesswork either regenerates constantly, wasting salt and water, or cannot keep up at peak demand. A filter with the wrong capacity needs cartridges far more often than expected. And equipment installed without a bypass, or without a drain for a softener, is awkward to service and may not treat all the water you meant it to.
How do installation and service work in Farragut?
- Installation at the point of entry or at a tap, with a bypass so the system can be serviced without shutting off the house.
- Setup and walkthrough: the system is set for your water and you are shown the routine maintenance, salt for a softener, cartridges for a filter.
- Service for existing softeners and filters that are underperforming, with the same evaluation-first approach.
Why Farragut homeowners call Straight Shooter Plumbing & Rooter
-
Free estimates during normal business hours, with the recommendation grounded in an evaluation.
-
Licensed, bonded, and insured plumbers on every job.
-
One-year workmanship warranty and a one-year satisfaction guarantee on installation work.
-
Financing available for up to three years at 0% interest, on approved credit, for whole-house systems.
-
A softener and a water heater are related purchases, since scale builds in the heater; the same team handles water heater services in Farragut.
-
Part of the Farragut plumbing services from the Tennessee team.
Next step
Before you buy equipment for a water problem, find out which problem you have. Call Straight Shooter Plumbing & Rooter at (865) 283-5643 or book online for water softener and filtration help in Farragut. Free estimates during normal business hours.